Eddy Current High Resolution Probes
Overview
TEK/TEL - Attached/Detachable
The eddy current high-resolution probes are lightweight, but solidly built probes with the coils protected with a plastic sleeve and stainless steel wear guides at front and rear ends. Their narrow coils make them ideal for thin tubing inspection such as titanium tubing.
Features
- Narrow coil, ideal for thin tubing inspection such as titanium tubing.
- Lightweight, solidly built.
- Coils protected by a plastic sleeve.
Stainless steel wear guides at the front and rear ends.
Standard/Custom Probes (Made to Order)
Use the nomenclature and the chart below to configure your part number.
Probe Type
Probe Diameter *
(use mm in part ID)
(use mm in part ID)
Center Frequency
Cable Length
(TEK only)**
(TEK only)**
mm
in.
TEK: Attached
TEL: Detachable
Use with TEZ-BBS or TEZ-BBK cables.**
TEL: Detachable
Use with TEZ-BBS or TEZ-BBK cables.**
Standard
TEK: 9.6 mm to 50 mm
TEL: 11 mm to 50 mm
by 0.2 mm
Custom (TEK only)
50.2 mm to 100 mm
TEK: 9.6 mm to 50 mm
TEL: 11 mm to 50 mm
by 0.2 mm
Custom (TEK only)
50.2 mm to 100 mm
Standard
TEK: 0.378 in. to 1.969 in.
TEL: 0.433 in. to 1.969 in.
by 0.008 in.
Custom (TEK only):
1.976 in. to 3.937 in.
TEK: 0.378 in. to 1.969 in.
TEL: 0.433 in. to 1.969 in.
by 0.008 in.
Custom (TEK only):
1.976 in. to 3.937 in.
015 (Low)
050 (Mid)
250 (High)
600 (Very High)
050 (Mid)
250 (High)
600 (Very High)
15 m (50 ft)
20 m (65 ft)
30 m (100 ft)
20 m (65 ft)
30 m (100 ft)
**TEZ cable information for TEL probes is available in the Tube Inspection Probe Catalog.