
Rientrano nella categoria trasduttori a immersione speciali numerosi tipi di trasduttori che permettono di realizzare numerose applicazioni specifiche come la misura di spessore di pareti, l'ispezione di placcatura di alluminio o il rilevamento di difetti array multielemento. Questo gruppo contiene i seguenti tipi di trasduttori: laterale, i-R e XMS.
Side Looking Case Side Looking Case
Side Looking Immersion Transducers

- Ideal for measuring wall thicknesses of pipe where access to the outer diameter is limited
- Small outer diameter allows for greater accessibility in tight spaces than standard immersion transducers with reflector mirrors
- Sound exit point is located at a 90° angle relative to the straight Microdot ® connector
- Probe extensions such as the F211 are available to lengthen the standard design
Part
Numbers
Numbers
Freq.
Nominal
Element Size
Element Size
Focus
Colspan=2
-
MHz
inches
mm
inches
V3591
10
0.125
3
0.50 OLF
V3343
20
0.125
3
0.50 OLF
Note: All above side looking immersion transducers have straight Microdot connectors.
Extra Miniature (XMS) Transducer
The XMS transducer is an extremely small 10 MHz immersion transducer with a 3 mm (0.118") diameter by 3 mm (0.118") long case. This transducer is ideal for extremely tight access areas or for multi-element array flaw detection. The transducer assembly has a special connector attached to the 1 m (38") long potted cable. An adaptor is also available to interface with most commercial ultrasonic equipment.

Frequency
Nominal Element Size
Colspan=2
Part Number
Included Adapter
MHz
inches
mm
-
-
10
.080
2
XMS-310-B
BNC
10
.080
2
XMS-310-L
Lemo ® 01
i-R Style
i-R Style Housings
0.50 inches (10 mm) element diameters in 0.75 inches (19 mm) x 0.75 inches (19 mm) rectangular housings with side mount (right angle), UHF connectors, and 303 stainless steel case housings are available.

