Products
Wire Encoder
Acquire high-quality phased array data with high positioning accuracy thanks to the wire encoder’s simple streamlined design, enabling you to focus on handling the probe. It installs quickly on both ferromagnetic and nonferromagnetic surfaces.Acquire high-quality phased array data with high positioning accuracy thanks to the wire encoder’s simple streamlined design, enabling you to focus on handling the probe. It installs quickly on both ferromagnetic and nonferromagnetic surfaces.
SteerROVER
The SteerROVER is a fully automated, steerable motorized scanner capable of performing weld inspection in remote locations. It can mount phased array as well as TOFD-P/E probes for inspection of circumferential or longitudinal welds.
WeldROVER™ Scanner
The WeldROVER scanner is designed to make fast, efficient phased array inspections on ferromagnetic piping or vessel girth welds and long seams with minimal training and setup time.
HST-Lite Scanner
The new HST-Lite scanner is the perfect choice for cost-effective, one-channel TOFD inspections when signal quality is important. The combination of magnetic wheels and spring-loaded probe holders offer the stability required to perform high quality, one-line inspections. The scanner can be operated using only one hand, and will attach to ferromagnetic surfaces even when in an upside-down position.
Mini-Wheel Encoder
The mini-Wheel Encoder is used for the positioning and dimensioning of defects in the scan axis. It can synchronize data acquisition with probe movement. It is also waterproof and compatible with Olympus standard PA wedges.
HSMT-Flex Scanner
The HSMT-Flex is intended for manual one axis encoded inspection of circumference welds on pipes of 4.5 in. OD and greater. The scanner can be fitted with up to 8 probes using optional probe holders, thanks to its capacity to bend in the center.
VersaMOUSE Scanner
The VersaMOUSE™ is a scanner designed for linear encoded scans with a phased array probe. The integrated indexing button makes it ideal for 2-D mapping applications such as CFRP flat panel and corrosion inspections. The VersaMOUSE can perform an encoded one-line scan, followed by indexing of the position in the perpendicular direction. Another one-line scan can then be performed and juxtaposed to the previous scan. This process is repeated to produce a complete 2D map of the area of interest.